Automotive Sensor Simulator & Tester ADD71
Description
Measure the signals of automotive sensors
The most complete hand held diagnostic tester for sensors,wiring,connectors and on-board computers
DC voltage,lambda,frequency and pulse signals can be measured
Digital display shows actual output of signals
Measures any voltage AC or DC,resistance or frequency output
Allows Simulation of most Sensor and computer managemeng omponents
Simulating temperature sensors,throttle potentiometers,switches,airflow meters and lambda/oxygen sensors
Features AC voltage output to simulate vehicle speed sensors(vss),CAM,CRANK,and ignition reluctors
Simulates actual working condition of any sensor without having to remove itfrom the vehicleA.B.S.,Crank,Can,Coolant,Oxygen,MAP,MAF,MAT,VSS,etc
Cheeks basic ECU operation
Controlling the signals being produced allows you to check ECU response andoperation.This prevents mis-diagnosis where the fault may lie in the ECU itselfor in the wiring between the component and the ECU.Works independently or withany scan tool ever made
Can be used on any domestic or import vehicle
Eliminates unnecessary replacement of non-defective sensors
Can drive computer into"open or closed loop
Specifications
Simulate Signal Range Function
DC Voltage 0-1V Simulating lambda/oxygen sensors
0-5V Simulating DC signal of sensors
0-12V
Resistance 0-5K Simulating temperature or resistance sensors
0-200K
Frequency SignalV/Duty/Hz 0-5v 10-90% 10-4KHz Simulating frequency signal sensors
0-12V 10-90% 10-4KHz
Test Function Range Basic Accuracy
DC Voltage 400mV,4v ,40v,400v,1000v ±(0.5%+3d)
AC Voltage 400mV,4v ,40v,400v,750v ±(0.8%+3d)
DC Current 40mA,400mA,10A ±(1.2%+3d)
AC Current 40mA,400mA,10A ±(1.5%+3d)
Resistance(Ω) 400,4K,40K,400K,4M,40M ±(1.0%+3d)
Capacitance 40nF,400nF,4μF,40μF,100μF ±(5.0%+3d)
Frequency 10Hz-10MHz ±(0.5%+3d)
Duty cycle 0.1%-99.9% ±(2.0%+3d)
Diode test and Audible Continuity test Test current:1±0.6mA
>60Ω Buzzer sounds
