NOTE: Reviews require prior approval before they will be displayed
UPA-USB V2014 Product name:UPA-USB V2014 language: English. Software Verison:V1.3 Product Information: Upa-usb 2014 is the full set with all adapters,The main Device can be directly connected to the Elrasoft.com UUSP (UPA-USB Serial Programmer) or by an optional DB9 male / female 1:1 extension cable. It's equipped with an 40pin ZIF Socket for all narrow and wide DIP / DIL devices as well as with a 16 pin SOIC ZIF (150mil, narrow) socket to cover most commonly used devices. Device configuration is done over special config keys which make the work convenient and safe compared to wiring up all manually. The main Device further includes a 10 pin ISP connector where the included ISP Adapters can be connected using a standard 1:1 flatribbon cable (included). The included PLCC ISP Adapters are to be put directly over the soldered chip of the target device making the work convenient and safe compared to soldering or using clips connecting up all manually. (Power from the UUSP to the ISP target can be enabled or disabled by a jumper next to the 10 pin ISP connector) Package contains: 1x UPA v1.3 programmer Config Keys: (For Device configuration) PLCC52 ISP Adapters: PLCC68 ISP Adapters: PLCC84 ISP Adapters: 1 x DIL to 10pin Flat-ribbon header (For using IC clips or clamps) 1 x Flat-ribbon cable 10pin Simply connect the mainboard to the UPA programmer directly or by using a DB9 male / female extension cable (1:1). Insert the correct config key into the slot of the mainboard and start programming either via the ZIF or SOIC Socket. You can also use the included DIL to 10pin Flat-ribbon header, put it inside the ZIF socket and wire up an SOIC clip or clamps for ISP use from there. Motorola MCU's Pick the Adapter you want to use, attach the flat cable to the Adapter (PIN1 is always indicated, on both the cable and also the Adapter) and also to the main board's 10pin ISP connector. Select the VCC supply source by the jumper on the mainboard next to the ISP connector (on = target supplied from upa, off = target got own supply). Slide the Adapter over the soldered PLCC MCU on the target PCB. (No soldering, no pinout reviewing, no pin counting, saves lots of time and hassle and let's you make your job faster, precise and easier) Once your workshop is equipped with our Adapter Set you will have a all new UPA Experience.
STMicroelectronics ST62*: NEC ..uDP780828A uDP780948 uDP780949 uDP780973 uDP780974 TMS...TMS370CX02 TMS370CX32 TMS370CX36 TMS370CX42 TMS370CX56 TMS370CX56 TMS370CX56 78K0/HC912 TMS370CX58 TMS370CX58 78K0/HC912 TMS375C006 Add function: + Added MC9S12HY64/HA32 support + Added Serial Flash memory support: A25L512/010/020/040/080/016/032, SST25VF512A/010A/020B/040B/080B/016B/032B, S25FL004A/008A/016A/032A/064A + Added 24C1024, 24C1025 support + Added Bulk erase data memory to PICs 16F913-7/946, 12F629/675 + Added script function GetPage + Added script function AutoBaudRateDevice (hc08 devices only) + Added script function GetProgrammerFrameChildCtrl( AChildCtrlName: string): TControl + Added script function EnablePicMemoryAreas( AProgram, AID, AConfig, ACalibration, AEEPROM: boolean ): boolean; + Fixed bug with script functions ProgramDevice, ReadDevice ... when used with PICs +Fixed bug with SetHC08SecurityBytes(SecBytes: string) function +Fixed bug with 68hc11 reading if Oscillator is not set to Auto +Updated script example files +The software is digitally signed -+USB driver upausb.sys is digitally signed and can be used with 64-bit windows XP/Vista/7 There are currently no product reviews.
NOTE: Reviews require prior approval before they will be displayed All goods are not marked are three packs of shops Customer Videos: See all 0 videos
Customer Images: See all 0 images
This product was added to our catalog on Sunday 22 September, 2013. |